I saw a post on Reef Central on how Cakepro was feeding her sun coral using part of a 2 liter bottle. Very clever! So I made one today so I can feed my yellow goniopora and try and resurrect my ailing sun coral which is on its last leg because I neglected to feed it the way it needs to be fed.
Modified to allow you to land the feeder on top of the coral and feed it without having to stick your arm in the tank every day. I call these lunar landers becuase it reminds me of a game that I used to play on my Apple // back in the day.
You will need some tools for this project:
• Scissors or Exacto Knife
• Silicon sealer
• Flexible air tubing
• Small piece of styrofoam
• Small rubber band
• Decorative glass rocks or something similar for weights
• Empty 2 liter, 1 litter or 8oz water bottle with cap
• Drill and two bits: one the size of air tube and a much smaller bit
• Ear dropper or turkey baster - something to squirt food in the air tube.
When selecting your bottle take care in getting one that is squatty like this one rather than pointy - this will help surround your coral with the food it needs rather than the food getting stuck up in the neck of the bottle.
Cut the height of your lander so that there is room for your coral inside of it.
Here I am using silicon sealer to adhere decorative glass aquarium rocks to the sides of the lander. This gives the lander the weight it needs for landing on top of your coral as well as keeping it right side up and with a little spin you can dig into your sand a little bit for a decent seal.
Drill a hole in the cap to poke the flexible air tube in. Drill a smaller hole off to the side on the cap for air to escape. This will prevent lifting or tipping if you accidently squeeze some air into the lander.
Poke the air tube through the top of the cap. Wrap a rubber band snuggly around the tube about an inch from the end and then siliconed it to the bottom of the cap. This was necessary as I wanted to drop the lander into the tank - let it sink - feed the coral and then yank the hose to retreive it without having to put my arm in the tank every time. My thinking was the rubber band/silicon combo would prevent the tube from slipping through when I tug on it - and so far so good - it works!
16 May 2008 at 10:49am
DUBLIN, Ireland----Research and Markets has announced the addition of "Consumer Do-it-Yourself Surveillance: Cameras, Broadband Services & Semiconductors" to their offering.
14 May 2008 at 4:00am
SUNNYVALE, Calif.----OCZ Technology Group, Inc. , a worldwide leader in innovative, ultra-high performance and high reliability memory, today unveiled their pioneering Do-It-Yourself Gaming Notebook Program.
15 May 2008 at 6:11am
''Only in America'' has become a phrase that often has negative connotations. Usually, it's used to describe something that's either tabloid fodder, untalented yet very successful, or both ( Paris Hilton, anyone?).
16 May 2008 at 12:01pm
Grass Valley Edius Pro 45 Broadcast (Rated by 0 users) Grass Valley EDIUS Broadcast is designed to meet the requirements of higherend broadcast and postproduction environments including support for newer nontape forms of video ...
